IEEE Wireless Power Technologies IEEE Wireless Power Technologies

References

  • Jow and M. Ghovanloo, "Design and Optimization of Printed Spiral Coils for Efficient Transcutaneous Inductive Power Transmission," IEEE Trans. Biomed Circuits Syst., vol. 1, no. 3, pp. 193-202, Sept. 2007.
  • Ahn et al., "Low frequency electromagnetic field reduction techniques for the On-Line Electric Vehicle (OLEV)," 2010 IEEE Int. Symp. Electromagn. Compat., Fort Lauderdale, FL, USA, 2010, pp. 625-630.
  • Y. Poon, S. O'Driscoll and T. H. Meng, "Optimal Frequency for Wireless Power Transmission Into Dispersive Tissue," IEEE Trans. Microw. Th. Techn., vol. 58, no. 5, pp. 1739-1750, May 2010.
  • Fotopoulou and B. W. Flynn, "Wireless Power Transfer in Loosely Coupled Links: Coil Misalignment Model," IEEE Trans. Magnetics, vol. 47, no. 2, pp. 416-430, Feb. 2011.
  • Ram Rakhyani, S. Mirabbasi, M. Chiao, "Design and Optimization of Resonance-Based Efficient Wireless Power Delivery Systems for Biomedical Implants," IEEE Trans. Biomed Circuits Syst., vol. 5, no. 1, pp. 48-63, Feb. 2011.
  • Hikage, Y. Kawamura, T. Nojima and E. Cabot, "Numerical assessment methodology for active implantable medical device EMI due to magnetic resonance wireless power transmission antenna," Int. Symp. Electromagn. Compat. – EMC Europe, Rome, Italy, 2012, pp. 1-6.
  • Christ et al., “Evaluation of wireless resonant power transfer systems with human electromagnetic exposure limits,” IEEE Trans. Electromagn. Compat., vol. 55, no. 2, pp. 265–274, Apr. 2013.
  • Christ, M. Douglas, J. Nadakuduti, N. Kuster, “Assessing human exposure to electromagnetic fields from wireless power transmission systems,” Proc. IEEE, vol. 101, no. 6, pp. 1482–93, Jun. 2013
  • S. Ho, S. Kim and A. S. Y. Poon, "Midfield Wireless Powering for Implantable Systems," Proc. IEEE, vol. 101, no. 6, pp. 1369-1378, Jun. 2013.
  • Kim et al., "Coil Design and Shielding Methods for a Magnetic Resonant Wireless Power Transfer System," Proc. IEEE, vol. 101, no. 6, pp. 1332-1342, Jun. 2013.
  • Feliziani and S. Cruciani, "Mitigation of the magnetic field generated by a wireless power transfer (WPT) system without reducing the WPT efficiency," 2013 Int. Symp. Electromagn. Compat. – EMC Europe, Brugge, Belgium, 2013, pp. 610-615.
  • Kalialakis, A. Georgiadis, “The Regulatory Framework for Wireless Power Transfer Systems”, Wireless Power Transfer, vol. 1, no. 2, pp. 108-118, 2014, doi:10.1017/wpt.2014.13.
  • Shinohara, A. Hirata, I. Laakso, and T. Onishi, “Analysis of in situ electric field and specific absorption rate in human models for wireless power transfer system with induction coupling,” Phys. Med. Biol., vol. 59, no. 14, pp. 3721–3735, 2014.
  • Kim, H. Park, J. Kim, J. Kim, S. Ahn, "Design and Analysis of a Resonant Reactive Shield for a Wireless Power Electric Vehicle," IEEE Trans. Microw. Th. Techn., vol. 62, no. 4, pp. 1057-1066, Apr. 2014.
  • Shin et al., "Design and Implementation of Shaped Magnetic-Resonance-Based Wireless Power Transfer System for Roadway-Powered Moving Electric Vehicles," IEEE Trans. Ind. Electron., vol. 61, no. 3, pp. 1179-1192, Mar. 2014.
  • Campi, S. Cruciani, M. Feliziani, "Magnetic shielding of wireless power transfer systems," 2014 Int. Symp. Electromagn. Compat., Tokyo, Japan, 2014, pp. 422-425.
  • Y. R. Hui, W. Zhong and C. K. Lee, "A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer," IEEE Trans. Power Electron., vol. 29, no. 9, pp. 4500-4511, Sept. 2014.
  • L. Chen et al., "Human Exposure to Close-Range Resonant Wireless Power Transfer Systems as a Function of Design Parameters," IEEE Trans. Electromagn. Compat., vol. 56, no. 5, pp. 1027-1034, Oct. 2014.
  • Y. Choi, B. W. Gu, S. W. Lee, W. Y. Lee, J. Huh and C. T. Rim, "Generalized Active EMF Cancel Methods for Wireless Electric Vehicles," IEEE Trans. Power Electron., vol. 29, no. 11, pp. 5770-5783, Nov. 2014.
  • Liu, Y. Guo, H. Sun and S. Xiao, "Design and Safety Considerations of an Implantable Rectenna for Far-Field Wireless Power Transfer," IEEE Trans. Antennas Propagat., vol. 62, no. 11, pp. 5798-5806, Nov. 2014.
  • Costanzo et al., "Electromagnetic Energy Harvesting and Wireless Power Transmission: A Unified Approach," Proc. IEEE, vol. 102, no. 11, pp. 1692-1711, Nov. 2014.
  • Kong et al., "An Investigation of Electromagnetic Radiated Emission and Interference From Multi-Coil Wireless Power Transfer Systems Using Resonant Magnetic Field Coupling," IEEE Trans. Microw. Th. Techn., vol. 63, no. 3, pp. 833-846, Mar. 2015.
  • Monti, P. Arcuti, L. Tarricone, "Resonant Inductive Link for Remote Powering of Pacemakers," IEEE Trans. Microw. Th. Techn., vol. 63, no. 11, pp. 3814-3822, Nov. 2015.
  • Kalialakis, N. Borges Carvalho, N. Shinohara, A. Georgiadis, D. Law, “Developments in wireless power transfer standards and regulations”, Wireless Power Transfer and related standards, vol. 6, no. 2, June 2016.
  • Campi, S. Cruciani, F. Palandrani, V. De Santis, A. Hirata and M. Feliziani, "Wireless Power Transfer Charging System for AIMDs and Pacemakers," IEEE Trans. Microw. Th. Techn., vol. 64, no. 2, pp. 633-642, Feb. 2016.
  • T Campi, S Cruciani, V De Santis, M Feliziani, “EMF safety and thermal aspects in a pacemaker equipped with a wireless power transfer system working at low frequency,” IEEE Trans. Microw. Th. Techn., vol. 64. no. 2, pp. 375-382, Feb.
  • Park et al., "A Resonant Reactive Shielding for Planar Wireless Power Transfer System in Smartphone Application," IEEE Trans. Electromagn. Compat., vol. 59, no. 2, pp. 695-703, Apr. 2017.
  • Campi, S. Cruciani, F. Maradei and M. Feliziani, "Near-Field Reduction in a Wireless Power Transfer System Using LCC Compensation," IEEE Trans. Electromagn. Compat., vol. 59, no. 2, pp. 686-694, Apr. 2017.
  • Kim, H. Hirayama, S. Kim, K. J. Han, R. Zhang, J. Choi, "Review of Near-Field Wireless Power and Communication for Biomedical Applications," IEEE Access, vol. 5, pp. 21264-21285, 2017.
  • Chakarothai, K. Wake, T. Arima, S. Watanabe and T. Uno, "Exposure Evaluation of an Actual Wireless Power Transfer System for an Electric Vehicle With Near-Field Measurement," IEEE Trans. Microw. Th. Techn., vol. 66, no. 3, pp. 1543-1552, Mar. 2018.
  • Song et al., "EMI Reduction Methods in Wireless Power Transfer System for Drone Electrical Charger Using Tightly Coupled Three-Phase Resonant Magnetic Field," IEEE Trans. Ind. Electron., vol. 65, no. 9, pp. 6839-6849, Sep. 2018.
  • Cirimele, M. Diana, F. Freschi, M. Mitolo, "Inductive Power Transfer for Automotive Applications: State-of-the-Art and Future Trends," IEEE Trans. Ind. Appl., vol. 54, no. 5, pp. 4069-4079, Sep. 2018.
  • Lee et al., "Low Leakage Electromagnetic Field Level and High Efficiency Using a Novel Hybrid Loop-Array Design for Wireless High Power Transfer System," IEEE Trans. Ind. Electron., vol. 66, no. 6, pp. 4356-4367, Jun. 2019.
  • Hong et al., "A Frequency-Selective EMI Reduction Method for Tightly Coupled Wireless Power Transfer Systems Using Resonant Frequency Control of a Shielding Coil in Smartphone Application," IEEE Trans. Electromagn. Compat., vol. 61, no. 6, pp. 2031-2039, Dec. 2019.
  • Campi, S. Cruciani, F. Maradei, M. Feliziani, “Magnetic field during wireless charging in an electric vehicle according to standard SAE J2954”, Energies, vol. 12, no. 9, p. 1795, 2019.
  • Cruciani, T. Campi, F. Maradei and M. Feliziani, "Active Shielding Design for Wireless Power Transfer Systems," IEEE Trans. Electromagn. Compat., vol. 61, no. 6, pp. 1953-1960, Dec. 2019.
  • Miwa, T. Takenaka and A. Hirata, "Electromagnetic Dosimetry and Compliance for Wireless Power Transfer Systems in Vehicles," IEEE Trans. Electromagn. Compat., vol. 61, no. 6, pp. 2024-2030, Dec. 2019.
  • Shah and H. Yoo, "Assessing Human Exposure with Medical Implants to Electromagnetic Fields from a Wireless Power Transmission System in an Electric Vehicle," IEEE Trans. Electromagn. Compat., vol. 62, no. 2, pp. 338-345, Apr. 2020.
  • Menciassi, V. Iacovacci, “Implantable biorobotic organs”, APL Bioeng. 4, 040402 (2020); https://doi.org/10.1063/5.0032508
  • Shinohara, "Wireless Power Transfer in Japan: Regulations and Activities," 2020 14th European Conference on Antennas and Propagation (EuCAP), Copenhagen, Denmark, 2020, pp. 1-4, doi: 10.23919/EuCAP48036.2020.9135422.
  • ITU-R Report SM.2303-2 “Wireless power transmission using technologies other than radio frequency beam”, 2017, https://www.itu.int/pub/R-REP-SM.2303-2-2017
  • ITU-R Recommendation SM.2110 “Guidance on frequency ranges for operation of non-beam wireless power transmission for electric vehicles”, 2019, https://www.itu.int/dms_pubrec/itu-r/rec/sm/R-REC-SM.2110-1-201910-I!!PDF-E.pdf
  • ITU-R Report SM.2392 “Applications of wireless power transmission via radio frequency beam”, 2016, https://www.itu.int/pub/R-REP-SM.2392.
  • ITU-R Recommendation SM.2129-0, Guidance on frequency ranges for operation of non-beam wireless power transmission systems for mobile and portable devices, 2019, https://www.itu.int/dms_pubrec/itu-r/rec/sm/R-REC-SM.2129-0-201908-I!!PDF-E.pdf
  • ETSI EN 303 417 V1.1.1 (2017-09) Wireless power transmission systems, using technologies other than radio frequency beam in the 19 - 21 kHz,59 - 61 kHz, 79 - 90 kHz, 100 - 300 kHz, 6 765 - 6 795 kHz ranges; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU, https://www.etsi.org/deliver/etsi_en/303400_303499/303417/01.01.01_60/en_303417v010101p.pdf
  • ETSI TR 103 493 V1.1.1 (2019-02) System Reference document (SRdoc); Wireless Power Transmission (WPT) systems operating below 30 MHz, https://www.etsi.org/deliver/etsi_tr/103400_103499/103493/01.01.01_60/tr_103493v010101p.pdf
  • ISO 19363:2020 Electrically propelled road vehicles — Magnetic field wireless power transfer — Safety and interoperability requirements, https://www.iso.org/standard/73547.html
  • ISO 15118-8:2020, Road vehicles — Vehicle to grid communication interface — Part 8: Physical layer and data link layer requirements for wireless communication, https://www.iso.org/standard/80525.html
  • SAE J2954_202010, Wireless Power Transfer for Light-Duty Plug-in/Electric Vehicles and Alignment Methodology, https://www.sae.org/standards/content/j2954_202010/
  • IEC 61980-1:2020, Electric vehicle wireless power transfer (WPT) systems - Part 1: General requirements, https://webstore.iec.ch/publication/31657
  • IEC TS 61980-2:2019, Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for communication between electric road vehicle (EV) and infrastructure, https://webstore.iec.ch/publication/31050
  • IEC TS 61980-3:2019, Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems, https://webstore.iec.ch/publication/27435
  • IEC TS 62764-1:2019 , Measurement procedures of magnetic field levels generated by electronic and electrical equipment in the automotive environment with respect to human exposure - Part 1: Low frequency magnetic fields, https://webstore.iec.ch/publication/33448
  • IEC TR 62905:2018, Exposure assessment methods for wireless power transfer systems, https://webstore.iec.ch/publication/61221
  • ICNIRP “Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz), Health Phys., vol. 74, pp. 494 –522; 1998.
  • ICNIRP “Guidelines for limiting exposure to time-varying electric and magnetic fields for low frequencies (1 Hz - 100 kHz),” Health Phys., vol. 99, pp. 818-836, 2010.
  • ICNIRP “Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz),” Health Phys., vol. 118, no.5, pp. 483–524; 2020.
  • CEN EN 45502-2-2 (2008), Active implantable medical device. Part 2-2: Particular requirements for active implantable medical devices intend to treat tachyarrhythmia (includes implantable defibrillators).
  • IEEE C95.1-2019 - IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz, https://standards.ieee.org/standard/C95_1-2019.html
  • ISO 14117:2019, Active implantable medical devices — Electromagnetic compatibility — EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices, https://www.iso.org/standard/73915.html
  • EN 50527-1:2016 – “Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices – Part 1: General,” CENELEC, Bruxelles, Dec. 2, 2016.
  • EN 50527-2-1: 2013 – “Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices Part 2-1: Specific assessment for workers with cardiac pacemakers,” CENELEC, Bruxelles, Dec. 2, 2016.
  • EN 50527-2-2: 2018– “Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices Part 2-2: Specific assessment for workers with cardioverter defibrillators (ICDs)”,” CENELEC, Bruxelles, May. 11, 2018.
  • Directive 2013/35/EU of the European Parliament and of the Council of 26 June 2013 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields).
  • CISPR 11:2015 , Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement, https://webstore.iec.ch/publication/22643
  • CISPR 36:2020, Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz, https://webstore.iec.ch/publication/27203
  • CISPR 25:2016 , Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers, https://webstore.iec.ch/publication/26122
  • IEC 61000-3-2 Electromagnetic compatibility (EMC) - Part 3-2: Limits for harmonic current emissions (equipment input current = 16 A per phase)
  • IEC 61000-3-3 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
  • IEC 61000-3-11 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection
  • IEC 61000-3-12 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase
  • IEC 61000-4-2 Electromagnetic Immunity - Testing and Measurement – Electrostatic Discharge
  • EN/IEC 61000-4-3 Electromagnetic Immunity – Testing and Measurement – Radiated EM Immunity
  • IEC 61000-4-4 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
  • IEC 61000-4-5 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
  • IEC 61000-4-6 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
  • IEC 61000-4-8 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
  • IEC 61000-4-11 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
  • IEC 61000-4-34 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
  • IEC 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments